Ampeg USA T-Shirt Black Large

The classic logo of a classic line of amps. 100% cotton.

Ampeg SVTMP Tube Mic/Line Preamp

This combination preamp/direct box features a 12AX7 tube and a 12AU7 tube to enhance any solid-state amp with classic Ampeg tone. Includes a combination XLR and 1/4" input jack, and 48V phantom power.

Ampeg SVT15E Enclosure

This is an especially compact yet powerful cabinet that delivers a full, round tone. It features both Neutrik Speakon connectors and standard 1/4". Handles 200W RMS, 400W program. 22" x 24" x 16". 72 lbs.

Ampeg SVT-810E Bass Enclosure

Decades of pro musicians don't lie, the Ampeg SVT-810E Bass Enclosure will rattle your foundation. 8 - 10" speakers produce an incredible wall-of-sound! Fidelity is enhanced by the fact that each pair of speakers is in a separate internal cabinet, which prevents standing wave interference. 800W RMS handling capability. 1,600W program handling. 4-ohm nominal impedance.

Ampeg R12R Reverberocket Amp

Digital schmigital. When you need the real raw power that drove rock 'n' roll to the heights of glory, you need 100% tubes. This Class AB 50W dynamo features 2 6L6s and 3 12AX7s for all the full, warm, crunchy, or edgy possibilities that can only come from properly driven valves. The 12" heavy-magnet Ampeg Vintage driver follows through on that genuine vintage feel with big volume that's forever true to the signal. 2 switchable channels, 3-band EQ, spring reverb, and line-level I/O give you full modern-day control and flexibility. 19"W x 24"H x 11"D. 45 lbs.

Ampeg BA-210 Bass Combo Amp

The Ampeg BA-210 Bass Combo Amp is compact, easy to transport, and puts out the sound. 220W of unbridled power, a piezo tweeter, and two crankin' 10" drivers with massive magnets bring all that fat tone into the real world. Sturdy birch cab.

Ampeg SVP1600 1200W Bass Power Amp

The Ampeg SVP1600 1200W Bass Power Amp is the MOSFET power section of the legendary Ampeg SVT-4 PRO. The Ampeg SVP1600 is a 3-space rackmount power amp that outputs 1200W RMS, 1600W peak @ 4 ohms mono-bridged. The inputs are standard 1/4" and the speaker outputs are both 1/4" and Speakon. Parallel line out jacks for output to another amp. Separate volume controls for channels A and B. Ampeg includes a built-in limiter with defeat switch in the SVP1600 Bass Power Amp.

Ampeg B115E 1X15 Speaker Cabinet

The B115E bass speaker cabinet delivers classic Ampeg tone through a single 15" Ampeg driver. Front tuned ports ensure solid low-end response. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling.

Ampeg Guitarist's Stool 24 Inch

Ampeg crafted this metal guitarist's stool with a cushioned seat and the Ampeg logo proudly diplayed on top. The 24" high stool is ideal for playing guitar and they make great bar stools.

Ampeg PBC-228 PortaBass 2 x 8 200W Bass Combo Amp

The Ampeg PBC-228 PortaBass 2 x 8 200W Bass Combo Amp features the patented Micro-Dynamic Technology (MDT) power amp circuitry. This technology eliminates bulky heatsinks and large fans because it is hyper-efficient, resulting in a svelte, 35-pound performer with plenty of output. Dual EQs, direct out, and versatile effects routing make the Ampeg PortaBass bass combo amp versatile in the studio as well as onstage.

Ampeg SVT-215E Enclosure

One of the world-renowned classic series, this cab provides huge bottom end that stays tight and clear, never muddy. 2 fifteen-inch drivers with eighty-ounce magnets set the entire hall into trembling motion. Super sturdy, reinforced cab. 26"W x 48"H x 16"D. 148 lbs.

Ampeg B2RE Bass Head and B410HLF 4x10" Half Stack

Includes the rackmount B2RE Bass Head and the B410HLF 4x10" cab.The B2RE Bass Head cranks out 450W of thunder to drive the B410HLF 4x10" speaker cab. 3-band rotary and 9-band graphic EQs let you hone in on the perfect sound for your style. 1/4" and Speakon outputs, XLR ine out, preamp out/power amp in jacks, and effects loop. The speaker cab delivers tight, punchy bass, clear mids and highs and is a perfect match with the B2RE.

Ampeg SVT-610HLF Bass Cabinet

The Ampeg SVT-610HLF 6x10 Bass Cabinet provides all the soul-stirring, breath-stopping punch and moan you need to hold down the bottom end. The bass guitar cab has 6 - 10" bass drivers with 30-oz. magnets and 2" voice coils, plus a 10-oz. horn with 1" coil to bring out the funky string snaps. Variable-level attenuator and resistive bulb wired in series with the horn to prevent damage. The SVT-610HLF also has rear skid rails for better protection and easier loading. 600W RMS and 1,200W program handling. 4 ohms impedance, 42Hz usable low frequency. 24"W x 40"H x 16"D. 115 lbs.

Ampeg PB800 Portabass 800W Bass Head

Designed with the working bassist in mind. It has the power and other features needed for pro bass performance and weighs only 20 lbs., making it one of the lightest in its power range. It has 2 channels with separate 3-band EQs that include sweepable mids, ultralow and high boosts, balanced line out, and an effects loop with blend control. Power is rated at 800W @ 2 ohms, 550W @ 4 ohms, and 300W @ 8 ohms. Rackmountable.

Ampeg PB-210H PortaBass Cab

Vertical cab houses 2 neodymium magnet woofers for a combination of lighter weight and higher volume output. A horn enhances articulation. The cab is constructed of Italian poplar plywood that offers lighter weight and greater resonance. A removable telescoping handle lets you load and roll to the stage. HF variable L-pad control, 1/4" and Neutrik Speakon connectors.

Ampeg B410HLF 4X10 Speaker Cabinet

The B410HLF bass speaker cabinet delivers classic Ampeg tone through 4 - 10" Ampeg drivers. A 1" horn handles the highs, with a 3-position attenuator controlling the mix. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling. Front, shelf-style port expands the low-frequency response.

Ampeg Worn-in Hat

Save BIG when you buy today!

Ampeg B1RE 300W Solid State Bass Head

The Ampeg B1RE 300W Solid State Bass Head offers you bass players the power and response of the Pro Series in a reliable, all solid-state format. It has an XLR balanced line out, MOSFET power amp, optocoupler limiter, and effects loop. The Ampeg B1RE Bass Amp Head features a solid 300W of output @ 4 ohms, 3-band EQ, and preamp out/power amp in jacks.

Ampeg SVT-2 Pro Series Amp Head

The Ampeg SVT-2 Pro Series Amp Head is a shining example of Ampeg's attention to quality and detail. You know it's right when the sound you hear matches the sound in your imagination. For over 5 decades, Ampeg has been helping bass players reach that place where it all comes together. 5 - 12AX7 tubes in the SVT-2 Pro Head provide you with gobs of tone, texture, and gain, while the six - 6550s launch 300 heart-thumping watts into the air. Flexible EQ including 3 tone controls, a 5-position midband frequency control, and a nine-band graphic equalizer work together to help you shape the tone you demand from your gear. The 1/4" thick extruded aluminum front panel not only look good, it is essential for safe racking. With the power and flexibility of the Ampeg SVT-2 Pro Amp Head, your creative mind has the palette to deliver the goods!

Ampeg B200R Rocket Bass Diamond Blue Series 1x15 220 Watt Bass Combo Amp

The B200R draws upon the legacy of the famous Ampeg Portaflex Flip Top from the 1960s, combining the sound, feel, and tone of this classic amplifier with solid-state technology for lightweight, maintenance-free reliability.The B200R features a 12AU7 preamp tube; 220 watts of power driving a custom-designed, 15" Eminence speaker; and a piezo high-frequency component for additional punch and tonal clarity at the upper end. Four bands of EQ plus Ultra Low, Ultra Mid, and Ultra High switches let you fine-tune your sound with ease and efficiency. Also features a balanced XLR output with level control.

Ampeg SVT450H 450W Classic Series Head

The Ampeg SVT450H 450W Classic Series Head has authentic vintage Ampeg tube sound with the Classic series look. 450W MOSFET output provides the most tube-like feel of any amp in its class. Optocoupler limiter circuit maximizes clean acoustic output and crunches a little when defeated. 3-band EQ plus 9-band graphic EQ. Pre/post EQ XLR line out, line out level select, input pad, variable speed fan.

Ampeg BA112 50W Single 12 Bass Combo

Delivers 50W of power to a single 12" speaker. It offers simple 3-band tone controls, plus a "style selector with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg AFP2 Footswitch

2-button footswitch with TRS cable. Works with the following Ampeg amps: SVT2PRO, SVPPRO, SVT3PRO, BA210SP Combo, and BA115SP Combo.

Ampeg Gig Bag for PB250 PortaBass

Save BIG when you buy today!

Ampeg PR-410HLF Pro Series Extended Range Bass Cabinet

The Ampeg PR-410HLF Pro Series 4x10 Ext Range Cabinet Speaker is designed for the highest fidelity reproduction. High power handling, flat response, and incredible construction in a great-looking enclosure. Features cast frame drivers, high-frequency horns with variable level attenuators and light bulb protection, thirteen-ply 3/4" Baltic birch plywood cabinets, multi-coat urethane polymer finish/sealant, sixteen-gauge steel grilles, edge-armor corner protection, 12dB/octave crossovers, Neutrik Speakons, and 1/4" inputs.

Ampeg Hot Rod Shirt Extra Large

This Ampeg Hot Rod shirt features hot flames racing up the right side of the front. 100% easy-care polyester.

Ampeg B2RE Rack Bass Head

The Ampeg B2RE Rack Bass Head cranks out 450W of solid state thunder at 4 ohms, 250W at 8 ohms. 3-band rotary and 9-band graphic equalizers let you hone in on the perfect sound for your style. 1/4" and Neutrik Speakon speaker outputs, XLR balanced line out, preamp out/power amp in jacks, and effects loop. And don't forget that killer Ampeg tone!

Ampeg SVT-3PRO Series Head

The tube preamp section of the Ampeg SVT-3PRO Series Head re-creates the great bass tone that made the original SVT the most respected bass amp of all time. The power section is tube-driven solid state with a toroidal transformer that generates less noise and magnetic interference. Delivers 450W @ 4 ohms and has an arsenal of tone-shaping tools: 3 bands of tone, a 5-position mid selector, 9-band graphic EQ, plus low and high boosts. Other pro features include input peak LED, input pad and bright switch, mute function, tuner out, variable line-out level, time-delayed turn on, DC-supplied filaments, and variable fan speed. 2U rackmount.

Ampeg SVT8PRO Rackmount Bass Amp Head

The Ampeg SVT8Pro bass amp head combines a vintage SVT preamp-complete with two 12AX7 and two 12AU7 tubes-with a powerful 2500-watt switch-mode Class D amplifier. Like all SVT Pro Series heads, the SVT8 Pro's front panel controls include an expanded EQ section for fine-tuning your sound.The unique power amp emulation circuit allows users to dial in the sound of an overdriven tube amp at any volume and with varying intensity.Also features variable speed fan, DC-supplied tube filaments for noise-free performance, and Neutrik Speakon connectors for quick set up and better conductivity. Rackmountable (2RU).

Ampeg BA115 Bass Combo

The Ampeg BA115 Bass Amp Series Combo, a member of Ampeg's starter series, has simple, clean looks and easy controls. The BA115 delivers 100W of power to a single 15" speaker. It provides simple 3-band tone controls, plus a "style selector" with 5 basic tone options. Other features include master and gain controls, a balanced line out (XLR), headphone jacks, and RCA inputs for connecting a CD or tape player. As a handy stage feature, the cabinet tilts back.

Ampeg SVT18 Cabinet

Massive chest-thumping bass is a lock everytime you haul the Ampeg SVT18 Cabinet onstage. Its 18" cast-frame driver thickens the plot with a 109 oz. magnet and a 4" voice coil. Surprisingly versatile cab boasts a frequency response of (-3dB) 35Hz-2kHz. 1,000W program, 500W RMS handling.

Ampeg SVT12HE 1X12" Bass Speaker Cabinet

The SVT12HE high-output bass enclosure brings Ampeg's signature tone and power to the stage or rehearsal space with a compact design. The SVT12HE delivers 300 watts RMS of power handling and 123dB of SPL thanks to a front ported baffle and custom-designed 12" driver. Its compact enclosure weighs in at 46 pounds and measures only 21W x 15"H x 16"D. Like all Classic Series enclosure, the SVT12HE is constructed of rugged Baltic birch plywood for structural integrity and maximum tonality.

Ampeg BA115HP 220 Watt 1x15 Bass Series Combo Amp

Simple and to the point, the BA115HP has a 220W power section, custom 15" woofer, and 1" compression tweeter with a variable pad to adjust the crossover level. The straightforward-yet-effective EQ controls deliver lots of tonal flexibility, especially in conjunction with the Style response control. An XLR direct out allows patching to a mixing board or recording console while the built-in digital chromatic tuner and mute switch make it easy to tune silently.

Ampeg B-4R Solid State Amp Head

The Ampeg B-4R Solid State Amp Head is the most powerful amp in its class and it's loaded with the features you need to make today's music. Here's the long list: dependable solid-state circuitry, MOSFET power section, 3 bands of tone with Ultra Mids, 5-position style selector, 9-band graphic, texture tube emulation circuitry, series/parallel effects with blend control, defeatable optocoupler limiters, push button biamp/full range capability, stereo/mono bridge switch, internal 24dB/8va crossover with 100Hz to 1kHz variable point, high/low balance control, mute function, 15 amp circuit breaker, and power to spare.

Ampeg SVT-VR Vintage Reissue 300 Watt SVT Amp Head

With the new SVT-VR, the Ampeg engineering and product development teams had one primary goal-get as close to the coveted tone of the classic SVT as possible. As a result, the preamp stage, power section, and even the rocker switches of the new SVT-VR emulate the exact signal path, tone, and vibe of the original.The all-tube, 300-watt SVT-VR amplifier is driven by a total of six 6550 power tubes for massive power and tone. In addition to the '70s style dials and rocker switches, the SVT-VR's preamp circuitry has been faithfully re-created to match the original.

Ampeg SVT-410HE Bass Enclosure

4 x 10" speakers with 2" coils and 30 oz. magnets. To enhance these is an added 1" horn. The cab handles 400W RMS and 800W program. 25" x 24" x 16". 91 lbs.

Ampeg R212R Reverberocket Amp

The Ampeg R212R Reverberocket Amp is the world's most sought-after amp by both jazz and blues guitarists. The Reverberocket Amp is characterized by its outstanding clean, fat, round tube tone and diamond blue vintage covering. The Ampeg R212R amp will take you back to tube-tone paradise. 50W of Class AB power, 2 Ampeg Vintage 12" speakers, 2 Groove Tube 6L6s and 3 - 12AX7s, 2-channel operation, and reverb. Bass, mid, and treble tone controls. Line out/line in connections have been added. Ampeg's R212R Reverberocket Amp is 25"W x 19"H x 11"D and weighs 55 lbs.

Ampeg SVP-Pro Series Bass Preamp

The Ampeg SVP-Pro Series Bass Preamp uses 5 - 12AX7 tubes to provide the true, rich, tubular tone only a genuine multivalve signal path can generate. Tube Drive Control gives you precision command over just how hot those babies burn. Input peak LED, input pad and bright switch, mute function (to avoid those annoying clicks when you switch instruments mid-song), balanced line out, effects loop, 3 EQ knobs, nine-band graphic EQ, and tuner out give you all the pro flexibility you expect from Ampeg. 19"W x 1.75"H x 10"D. 9 lbs.

Ampeg BA500 500 Watt 2x10 Bass Combo Amp

The Ampeg BA500 500 Watt 2x10 Bass Combo Amp delivers 350W used alone, or up to 500W with an extension cab. 2 custom 10" drivers and a 1" compression horn deliver punch and definition. Graphic EQ, balanced line out, mute switch with tuner out, tilt-back design, and defeatable limiter. Ultra Mid tone control for instant sound shaping. Line out with selectable level.

Ampeg SCP-OD Reissue Scrambler Pedal

The SCP-OD Scrambler Reissue Pedal takes the original cosmetic design of the Ampeg Scrambler pedal from 1969 and updates it with a special modern twist. The SCP-OD features a distortion circuit controlled by the Balance knob and a special circuit controlled by the Texture knob that adds upper octave harmonic content to the signal. Using the 2 controls you can blend up tons of unique overdrive effects. True bypass circuitry doesn't suck your tone dry when you're not using the pedal. Comes in a rugged die-cast housing.

Ampeg USA T-Shirt Black Extra Large

The classic logo of a classic line of amps. 100% cotton.

Ampeg AFP3 Triple Footswitch

The Ampeg AFP3 Triple Footswitch is a 3-button footswitch with TRS cable. For use with Ampeg amps.

Ampeg SVT1000 Bass Head

The Ampeg SVT1000 Bass Head is a 1,000W (at 4 ohms) solid state bass amplifier head featuring a 9-band graphic EQ in addition to a 3-band parametric. The Ampeg SVT1000 also features a 5-way switch for instant EQ shifts in the midrange frequencies. Built-in limiter with a defeat switch. Bass amp head back panel has both Neutrik Speakon and 1/4" speaker outs.

Ampeg J12T Tremolo Amp

This all-tube sweetheart features 2 EL84s in the power section and 2 - 12AX7s in the preamp. It generates 15W of Class A power to drive a single 12" Ampeg Vintage speaker. Features genuine tremolo with intensity and speed controls and reverb. Vintage-style blue diamond covering.

Ampeg BA115HPT 1X15 220 Watt Bass Combo Amp

The BA115HPT has all the professional features of other Ampeg Bass Amp Series combos, with the addition of a 12AU7 tube integrated into the preamp circuit. Line out, 3-band EQ, Style control, and padded input option in a robust, tilt-back enclosure.The BA115HPT features 220 watts of power, a 15" driver, and a 1" compression driver. In addition, the BA115HPT has dedicated input and master gain controls as well as CD input and mute switch.

Ampeg B-100R Bass Combo Amp

The Ampeg B-100R Bass Combo Amp has the same warm tone and simple controls that made the Portaflex Ampegs of the 60s so popular, but it's solid-state for lighter weight and optimum reliability. 100W of power push a single vintage 15" driver. Blue Diamond covering gives it the classic Ampeg look of the 60s.Don't forget the optional casters!

Ampeg BXT210M 400W 2 x 10" Bass Cabinet

BXT enclosures feature American-made, custom cast-frame drivers, and 1" compression drivers for the horns. The crossover was designed to smoothly reproduce the mids and highs for a focused, naturally-scooped tone. Front-shelf ports produce extended low frequencies eliminating the need for additional cabinets. 1/4" and Neutrik Speakon connectors plus high-frequency protection.

Ampeg BSE-115 200 Watt 1x15" Bass Cab

Ampeg's most affordable enclosure has all the premium American-made components and features of other Ampeg enclosures. 123dB maximum SPL.

Ampeg SVT-410HLF Classic Series Bass Cabinet

The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz! 30"W x 24"H x 19"D. 110 lbs.

Ampeg SCP-OCT Sub-Blaster Bass Octave Pedal

Sharing the same '60s Scrambler cosmetic design as the SCP-OD, the Ampeg SCP-OCT Sub-Blaster Bass Octave Pedal features the Octave Divider circuit found in the popular SVT-5PRO. With its fast tracking capabilities and ability to hold notes even at low volumes, the SCP-OCT is a great addition to your tone arsenal. True bypass circuitry doesn't suck your tone dry when you're not using the pedal. Comes in a rugged die-cast housing.

Ampeg USA T-Shirt Black Extra Extra Large

The classic logo of a classic line of amps. 100% cotton.

Ampeg B500DR Bass Head

The Ampeg B500DR bass head uses a digital "front end" to remember your analog amp settings. This solid-state head has 350W output at 4 ohms and 500W at 2 ohms. Its 4 memory locations store your amp settings, remembering the settings for gain, EQ, effects blend, even which input you use! It's perfect for players who bring more than one bass to the gig. Dial in and save the perfect sound for each instrument and choose them with a button push. Even with one bass, the B500DR lets you automatically call up settings for R&B, rock 'n' roll, jazz, or funk. Each of the memory location is also footswitchable with the included 4-button footswitch.

Ampeg SVT-4 PRO Series Bass Head

The Ampeg SVT-4 PRO Series Bass Head gives you lots of tonal control and lots of power. This true hybrid features a 3-tube preamp, a Mos-Fet power amp that delivers 1,200W into 4 ohms, tone-shaping tools, and all the Pro features you'll ever need. For tone control you get 3 tone controls, a 5-position mid switch, a 9-band graphic, and ultralow/high boosts. It also features a defeatable optocoupler limiter, a variable 0-7:1 compressor, an internal 24dB/octave crossover, a 50Hz-1kHz crossover point, high/low balance control, tuner out/mute function, 1/4" biamp outputs, 2 balanced line outs with transformers, 2 effects loops, and 2 preamp out/power amp ins. It gives you classic SVT tone and more.

Ampeg BA115T 1X15 100 Watt Bass Combo Amp

The BA115T has all the professional features of other Ampeg Bass Amp Series combos, with the addition of a 12AU7 tube integrated into the preamp circuit. Line out, 3-band EQ, Style control, and padded input option in a robust, tilt-back enclosure.The BA115T features 100 watts of power, a 15" driver, and a piezo high-frequency component for additional punch and tonal clarity and at the upper end.

Ampeg SJ-12T Super Jet

The Super Jet is a smooth ride with 50 Class AB watts, a single 12" Ampeg Vintage speaker, all-tube design (2 - 6L6s and 2 - 12AX7s), reverb, and tremolo. Tone and tremolo speed and intensity controls. Vintage Ampeg look with blue diamond covering and stovepipe knobs. It produces the outstandingly clean, fat, round tone that jazz and blues players crave. 19"W x 16"H x 10"D. Only 30 lbs.

Ampeg PB212H 400W 2x12" Bass Cabinet

The PortaBass PB2121H cab is designed to combine tone and clarity with portability. Lightweight plywood cab construction and neodymium speaker magnet technology both contribute to reduced weight, while a removable telescoping handle and easy-glide casters let you manuever it from the car into the club without the heavy lifting bass players often deal with.

Ampeg SVTDI Tube Bass Direct Box

Tube-driven or direct modes, through jack. S/N ratio >90dB, and a heavy-duty metal Pro Series housing.

Ampeg SVT-210HE Classic Series Bass Cabinet

Solid Ampeg sonics for that classic, punchy bass sound.

Ampeg Hot Rod Shirt Large

This Ampeg Hot Rod shirt features hot flames racing up the right side of the front. 100% easy-care polyester.

Ampeg SVT-6PRO 1100 Watt Tube/Solid State Bass Head

The SVT-6PRO features a total of 6 tubes in the preamp and driver stages for tone shaping. The 4-band semi-parametric EQ section offers +/-18dB of adjustment per band selection for fine tuning critical frequencies. The power section delivers 1,100W of power at 4 ohms. It also features onboard compression at the input stage, and a tube voltage control to adjust the response of the power amp driver tubes.

Ampeg V4BH 100 Watt Tube Bass Head

The Ampeg V4BH 100 Watt Tube Bass Head is similar to the SVT, just smaller in output (100W). It uses the same tubes in the preamp and drive sections (2 - 12AX7 in the preamp, a 12AU7 and 12AX7 for drive). For the power section it uses 4 6L6s. Controls include 3-band EQ, 5-position mid-tone control, ultralow/high boost, and presence switch. Connections include normal and padded input, a balanced line out, and preamp out/power amp in. 24" x 11" x 13". 40 lbs.

Ampeg B1RE Bass Head and B410HE 4x10" Half StackB1RE Bass Head & B410HE Half Stack

Includes the B1RE bass head and B410HE 4x10 cab.

Ampeg B-15R Diamond Blue Series Amp

It has the same flip top as the original. It has the same blue diamond covering. And it has the same signature sound as one of the tidiest, coolest combos of all time. 100W of power (60W in low-power mode) drives a 15" speaker with a tweeter for added edge. Quick, easy tone shaping is provided by a 5-position mid-switch and 3 tone controls. Updated features include a balanced line out and a preamp out/power amp in. Play this amp and relive the glory days of the 60s. 24" x 33" x 16.5". 117 lbs.

Ampeg BA-210SP Bass Combo Amp with Effects

The Ampeg BA-210SP Bass Combo Amp with Effects gives you 16 preset effects from overdrive to funk wah. Its bass synths give you vintage feel with a whole lot of room to mess around with your sound. Footswitch clicks among 4 preset picks. 220 watts of unbridled power, a piezo tweeter, and 2 crankin' 10" drivers with massive magnets bring all that fat tone into the real world.

Ampeg SVPCL Classic Bass Preamp

The Ampeg SVPCL Classic Bass Preamp is an all-tube preamp section of the SVT Classic head. Ampeg gives you 3 bands of EQ, 5-position midrange and ultralow selector, tuner out, balanced line out, and pre/post EQ line out with the SVPCL Classic Bass Preamp.

Ampeg SVT-CL Classic Bass Head

The reissue Ampeg SVT-CL Classic Bass Head brings back in all its glory a classic big stage amp that was the choice of players in the '60s. There's no question that the SVT-CL delivers 300W (to either 2 or 4 ohms). Its tube array includes 2 - 12AX7s in the preamp, 2 - 12AU7s and a 12AX7 for drivers, and six - 6550s for power. Controls include 3 bands of tone, a 5-way mid selector, plus ultralow and high boosts. Other pro features on the Ampeg SVT-CL Bass Head include normal and padded inputs, tube protection circuitry, auto-fault mode, fan cooling, slave output jack, 4/2 ohm selector, user biasing controls, and 3-position AC polarity switch. 24 W x 11-1/2"H x 13"D. 80 lbs.

Ampeg B410HE 4X10 Speaker Cabinet

The B410HE bass speaker cabinet delivers classic Ampeg tone through 4 - 10" Ampeg drivers. A 1" horn handles the highs, with a 3-position attenuator controlling the mix. Nickel corners protect against damage. Casters and spring-loaded handles make it a breeze to move around. 200W RMS/400W peak power handling.

Ampeg Grease Monkey Hat Black

Get on "bass with the Ampeg-logo baseball cap in black! One size fits most.